KREBS® slurryMAX™ Pump

Our Split-case slurryMAX™ Pump solution

You asked for a split-case pump with longer wear life and better efficiency – one that can easily and safely be installed throughout your plants. Our solution? The slurryMAX, with multiple liner and impeller material options.

Key Benefit

Lower your operating costs with our efficient Split-case Slurry Pump

Even and predictable wear life expand_more

Extended wear life is delivered through our wear ring technology and versatile range of material options. The slurryMAX Pump maintains hydraulic performance throughout the life of the pump, increasing the life of all wet end parts and reducing power consumption.

Interchangeable material options expand_more

Multiple elastomer, alloy and polyurethane material combinations are available for all applications. Our casings and elastomer liners are designed to withstand slurry turbulence and allow for a wide operating flow range.

Energy savings expand_more

By solving both the grinding and the recirculation problems within the pump, our slurryMAX increases slurry efficiency by 10-15%. This results in lower power consumption and lower cost per ton.

Eliminate gland water requirements expand_more

Customers all over the world are in need of cost effective solutions to minimize water usage in their plants. The increased performance of the slurryMAX centrifugal seal with its large diameter expeller and oversized vanes opens the door for more applications that previously had no alternative but to use water flush or expensive mechanical sealing systems.

Product Features

Tough and versatile material options for your slurry pumping needs.

Our heavy-duty, Split-case-design Pump incorporates hydraulic efficiency and our proven millMAX wear ring technology to create the most efficient and longest-lasting slurry pump of its kind. With multiple liner and impeller material options, we’ve designed the slurryMAX to handle the majority of applications for any plant across multiple industries.

Our proprietary wear ring for suction side sealing is one of the key reasons that lead the pump manufacturer market. This feature allows adjustment of the impeller to the back to boost centrifugal seal performance, while limiting suction-side recirculation.

A removable suction plate, available on models that are 8 x 6 and larger, allows impeller and suction-side liner assembly replacement without disturbing the casing and discharge piping.

Reverse taper roller bearings increase the effective load span to improve wear life. The pumping action of the taper rollers discharges grease to the outside, preventing an influx of slurry and eliminating the possibility of failure from over-greasing. Heavy-duty shaft and taper roller bearings rated at 100,000 hours minimum of B10 life.

An optional drain port/plug casing feature may be added to allow water drainage.

slurryMAX™ Split-case pump product range

Multiple liner and impeller material options

Our slurryMAX handles the majority of applications for any plant across multiple industries. Simply put, the slurryMAX is the most versatile, efficient and longest-lasting slurry pump of its kind. Coupled with existing KREBS horizontal pumps, the slurryMAX will lower the total cost of ownership of every centrifugal slurry pump in your plant.

We think the safety of your fingers are ten great reasons to try a slurryMAX!

We designed a volute liner with an integrated back liner that bolts securely to the outer drive side casing for ease of assembly and hands-free safety. Our 8x6 and larger slurryMAX pumps feature a simple removable suction liner assembly for inspection of internals and replacement of impeller without removing the discharge pipe. Easy-to-use lifting jigs allows for safe and rapid rebuilds. Look to us for all your slurry pump needs, we aren't just the manufacturer, we design, provide solutions, monitoring technology and more. Check out our full line of horizontal slurry pumps.

slurryMAX™-U with polyurethane liners, impellers and wear rings

The polyurethane liners in our new slurryMAX-U provide the perfect middle ground between traditional metal and elastomer lining in pumps. Our polyurethane liners thrive in fine particle applications where elastomers were once the only solution. They also give you the abrasion resistance of metal liners to protect against cutting and tearing due to sharp, large particle impact.

■ Cost effective

■ Excellent performance in fine particle applications

■ Higher impeller peripheral velocity limit

■ Corrosion resistance similar to rubber-lined pumps